DrPhone 4x1 Digital Optical Audio SPDIF Toslink – Fibre Optic Switch with IR Remote Control – Black

Optical audio switch 4x1: Four ways to switch optical fibre signals to one set of SPDIF / TosLink signal receiving devices.

Supports audio format: LPCM2.0 / DTS / Dolby-AC3, 96 Khz, it does not support 7.1CH Dolby Digital Plus, Dolby TrueHD, because 7.1CH audio cannot be transmitted via fibre optic cable and must be transmitted via HDMI cable.

Long distance signal transmission: Uses fibre optic cable loss minus 0.2Db / m, output distance is up to 40m / 130ft.

Voltage protection: Overvoltage protection can prevent damage caused by connecting an unmatched power adapter to the device.

High-quality aluminium alloy design: General shielding without signal interference, ensures high-quality audio signal transmission

Application:
You can connect up to four devices (e.g. receiver, computer, game console such as PS3/PS4 or Xbox/Xbox One, Blu-ray player, Apple TV, etc.) to one terminal device (sound bar, receiver, speakers, HiFi system, etc.) on a Toslink port with this Toslink switch.

Specifications:
Supported audio format: LPCM2.0/DTS/AC3
Peak wavelength: 650nm
Max baud rate: 16 Mbps
Output cable distance: ≤40m (Use fibre optic cable loss less than 0.2Db/m)
Max working current: 100mA
Power adapter specification: Input: AC (50 HZ, 60 HZ) 100 V-240 V; output: DC5V/500mA
Operating temperature range: (0 to + 40℃)
Humidity range: 5 to 90% RH (No condensation)
Dimensions (L x W x H): 94x52x20 (mm)
Weight: 151g