DrPhone VA1 – Fingerprint Lock with Fast Unlocking – Padlock for Cabinet, Safe or Locker

Say goodbye to cumbersome keys, don’t worry about losing your lock keys. With the VA1 Fingerprint Lock your finger is the key. Register up to 20 fingers with the VA1 Fingerprint Lock. The VA1 Fingerprint Lock can be used in countless ways. Use the VA1 fingerprint lock to secure a door, cupboard doors, etc.

Unlocking: After each unlocking the success rate is improved by merging fingerprints and learning algorithms for image recognition.

Compatible with cupboard doors, storage cabinet locks, office cabinets, etc.

Installation:

1. Hold the sensor for 9 seconds. The intention is that 3 blue lights will flash consecutively
2. When it is flashing you can remove your finger. Then place the finger on the sensor with which you want to unlock the lock.

3. Registration is successful when a blue light stays on constantly.

Features:

• Fingerprint locking
• Easy operation
• Waterproof and dustproof

Specifications:
- Colour: Silver
- Material: zinc alloy + stainless steel
- Capacity: 20 fingerprints
- FAR (False Acceptance Rate): <2%
- FRR (False Rejection Rate): <0.002%
- Electrostatic protection: >15kV
- Built-in battery: 1 * 3.7 V 150 mAh lithium battery
- Charging port: micro-USB, 3.7 V
- Charging time: Approximately 2 hours (do not use fast chargers, we recommend a maximum of 5V)
- Working time: Approx. 180 days (10 unlocks per day)
- Operating temperature: -20 ~ 70℃
- Operating humidity: 5%-95% (non-condensing)
- Hole diameter: >18 mm
- Lock thickness: <22 mm
- Item size: 40 * 15 * 48 mm 
- Lock size: 34 * 16 mm (diameter * H)
- Item weight: 98 g
- Package weight: 129 g 

Installation & Use on Cabinets: Requirements for proper mounting
- Hole diameter of cabinet lock: minimum 18 mm
- Maximum thickness of cabinet bracket/lock: < 22 mm
- Lock bracket size: approx. 34 mm wide × 16 mm high

Make sure your cabinet or storage device meets these dimensions. The bracket must easily fit through the locking opening and lock without tension or distortion.

Compatible with:
- Lockers with metal locking eyes
- Toolboxes
- Storage boxes with locking plate
- Cabinets with pre-drilled padlock eyes
- Backpacks with double zipper eyes

- Not compatible with:
- Cabinets without locking or possibility to pass a bracket through
- Locking eyes thicker than 22 mm or with too small diameter (<18 mm)
- Built-in locks (this is a padlock, not a cylinder lock)

Operating conditions
- Temperature: -20 °C to +70 °C
- Humidity: 5% – 95% (non-condensing)
- Waterproof rating: IP65 (rain and splash resistant, not submersible)