DrPhone AirPro3 Mini Car Air Pump - DC12V - 100W – 150PSI - Electric Air Compressor with Digital Display & LED Torch

The DrPhone Airpro3 features a beautiful texture. The air pump motor guarantees you a fast and high-quality pump. With 150 PSI of pumping power, you have a powerful yet compact pump at your disposal.
The portable electric air compressor offers a maximum inflation pressure of 150 PSI, allowing you to fully and quickly inflate a flat bike tyre in about a minute. The manual also states how long it may take for different groups such as bikes, car tyres, motorcycles, balls (volleyball, basketball, football etc).

EASY TO USE: Simply plug into the car socket, attach the hose to the tyre, set the desired PSI and flip the switch.

MULTIPLE USES: Supplied accessories for sports balls, air mattresses, balloons and other bouncy castles.

BUILT FOR YOUR SAFETY: Built-in LED torch helps you be prepared for night emergencies.

PREMIUM CONSTRUCTION: Made from extremely durable, lightweight plastic. The sturdy nylon hose withstands high pressures and ensures maximum airflow.

FAST REFILLING: It takes only 30 seconds to inflate a tyre of normal size. Note this varies per product.

ANTI-SLIP: The Airpro 3 comes with anti-slip featuring 4 round anti-slip pads built in to prevent your device from sliding when placed on the ground.

SUITABLE FOR: The Airpro 3 can be used for many products such as:
- Car tyres
- Bikes (mountain bikes, electric bikes etc)
- Balls (volleyball, basketball, football etc).
- Air beds
- Lifebuoys etc

The DrPhone AirPro is also equipped with 3 nozzle adapters for mattresses / airboats / toys / sports balls / bouncy castles etc.

How to use:
Step 1: Start the car
Step 2: Connect it to your cigarette lighter
Step 3: Put the valve cap on your car tyre
Step 4: Set the correct tyre pressure via the digital display.
Step 5: Press the inflation switch "Power" (large round button in the centre).

Specifications:
- Rated voltage: 12V
- Rated current: <8.5A
- Power: 100W
- Airflow: >35L/min
- Output air pressure: 150PSI
- Cylinder specifications: 19MM
- Speed: 16500R/min USE
- Noise: 85 dB
- Material: ABS +PP + copper
- Continuous working time: <30min (normal scenario)

The above data are all measured by the factory, but due to objective environmental reasons, the data may vary and be biased.

Steps for use:
1. The activated digital tube lights up and displays the real-time air pressure value; Click Power to start the motor (recall the preset tyre pressure value before switching off the device), the sensor automatically detects when the air pressure is reached.
2. Press the UNIT Switch to change the unit: PSI, Bar, Kg/cm2.
3. Preset tyre pressure. Press the '+' or '-' button to open the preset status, display the last preset pressure and press the Unit button to switch the unit. Tap +' to increase (hold to increase quickly) Tap - to decrease (hold to decrease quickly) The preset is completed 3 seconds after the button is no longer pressed and the actual tyre pressure value is displayed.
4. After setting is complete, click the inflation switch "Power" (large round button in the centre) to start the motor pumping, pump until the tyre pressure reaches the preset value.
5. When the preset value is lower than the actual pressure value of the tyre, it cannot be inflated.
6. When changing and inflating tyres, first switch "Power" off and then switch the power on again.

Note the buttons of this pump and what they do can be found in the manual.

Precautions:
1. This product is not a toy and it is forbidden for children to use it. It is recommended that the user is over 16 years old. The inflation process must be at a safe distance between children and the air pump.
2. The product has a built-in DC motor, which can generate electric sparks during operation. Do not use it in a flammable and explosive environment.
3. If abnormal noise or high temperatures occur during operation, switch off immediately.
4. Before setting the tyre pressure value, confirm that the correct measurement unit is selected, otherwise it may cause tyre rupture or accidents, the general unit conversion is: 1bar=14.5psi, 1bar=100kpa, 1bar=1.02kg/cm
5. Do not leave during inflation and observe the inflation process to prevent overpressure when the preset air pressure is not set.
6. Use in a dry and clean environment. Sand and dust ingress can damage the product. This product is not waterproof, do not wash.