DrPhone Skylink Mega3 - Bluetooth 5.0 Audio Adapter - 3 in 1 - AptX - Transmitter / Receiver / - RX/TX/Bypass /SPDIF/RCA/Aux 3.5

Class I antenna / long range: With the upgraded V5.0 single antenna, our transmitter receiver can achieve a range of up to 70 metres in open air and up to 30 metres indoors.

AptX Low Latency / AptX HD: with Qualcomm aptX Low Latency and aptX HD support, it offers distortion-free digital audio and ensures perfect lip sync. AptX low latency technology eliminates Bluetooth audio delay, and aptX HD provides the perfect sound experience, so you can enjoy high-definition sound.

Bluetooth 5.0: V5.0 and the high-end CSR8675 chip provide the best transmission efficiency, stability and ultra-low power consumption.

Dual-Headphone Streaming: Stream audio to up to two headphones or speakers simultaneously while watching TV and adjust the volume levels for each individually.

Transmitter / Receiver: Universal audio allows your TVs and other enabled devices to stream audio to your headphones, or enables your home stereo system to receive streaming audio from your mobile phone and tablet.

3-in-1 Bluetooth TX/RX/BYPASS Mode:
TX Mode: connect Bluetooth transmitter audio output devices, such as TV, iPod or PC, and you can enjoy ultra-fast, high-fidelity audio from your Bluetooth headsets, headphones or speakers.
RX Mode: This allows you, for example, to give your old stereo system a Bluetooth connection and renew it and use it as a Bluetooth device.
BYPASS mode (Wired): cable connection between TV and Soundbar/Speaker/Amplifier (No Bluetooth).

LED status indicators: LED indicators are used to identify which operating modes you are using. There are various connections such as (aptX, aptX LL, aptX HD, RX, TX SBC), 3.5mm audio (aux)/SPDIF. You can then identify via the status if the pairing is successful. Our audio supports full status/codec indicators, making it incredibly easy to set up and use. If the device is not connected after 10 minutes, it automatically goes into sleep mode and you can press any key to wake it up.

OPTICAL + 3.5 mm: Supports both digital (optical) and analogue (RCA / 3.5 mm audio) input and output, making it compatible with 99% of TVs on the market.

Compatible with all devices (smartphone, earphone, speaker etc) any version of Bluetooth on the market, including: Bluetooth 1.0/1.1/1.2/2.0/2.1/3.0/3.1/3.2/4.0/4.1/4.2/5.0 etc.

Note:  Sony's Bluetooth headset/headphones use a special encoding method. These are not public for other devices to connect. So when you put Sony's Bluetooth headset/headphones in Bluetooth transmitter mode with our devices, it may take longer to pair. The pairing varies on different Sony models. But they can certainly pair successfully with our devices.

Features:
- 3 in 1 Bluetooth audio transmitter & receiver
- Various types of audio codec such as aptX, SBC
- OPTICAL + 3.5 mm connection
- LED status indicators
- Class I antenna / long range
- Bluetooth 5.0
- By-pass Mode

Specifications
-Bluetooth version: 5.0 +EDR Class1
-Bluetooth Chip: CSR8675
-Bluetooth frequency: 2.402 -2.480 GHz
-Bluetooth profile: RX: A2DP AVRCP / TX: A2DP
-Range: 70m
-Input voltage/current: DC 5V
-Input/output connection: SPDIF, 3.5MM stereo audio interface
-Audio CODEC: aptX HD, aptX Low Latency, aptX, SBC
-Bluetooth supported profiles: RX: A2DP AVRCP / TX: A2DP
-Weight: 250g Size: 95.2(L) * 65.1 (W) * 24.7 (H) mm
-Operating current: Approximately 70-90mA in receiver mode, approximately 60-220mA in transmitter mode and approximately 50mA in By-Pass Mode
-Colour: black
-Material: plastic

Note:
-To obtain the best sound quality, make sure your headset or other devices also support aptX-HD.
-The range can be affected by Wi-Fi routers, Wireless TV adapters, space obstacles such as walls, etc., and also depends on the receiving device.