DrPhone ARC11 Audio Extractor - ARC - HDMI with digital optical TOSLINK SPDIF/coaxial and analogue 3.5 mm L/R stereo

The ARC11 is very handy because it offers Broad Compatibility, allowing you to easily transfer your TV’s sound to a soundbar or amplifier. It has a sleek design and is not very large, making it easy to place next to your TV.

Features

ARC function: Transfers audio from your TV to a soundbar or amplifier. Connect the HDMI (ARC) port of your TV to the Audio Adapter HDMI output port with an HDMI cable, then connect optical cable/L/R or 3.5mm headphone to the soundbar, speaker, home cinema, A/V receivers, etc. Note: if it does not work with the TV, adjust the TV resolution to 1080P or lower.

Frequency: The ARC11 supports frequencies of 32, 44.1, 48, 96 and 192 KHz, and 24-bit S/PDIF incoming bitstream on left and right channels.

Note: Please use HDMI 1.4 cable, Note: It is necessary to adjust the speaker volume manually. The TV remote cannot change the audio volume and the TV remote cannot change the audio volume.

Audio output: This HDMI ARC adapter can transfer audio from your TV (supporting ARC function) to optical/coaxial/3.5 mm/L/R audio via ARC adapter through HDMI/ARC interface and send audio simultaneously.

Compatibility: Compatible with all HDTVs with ARC function and all soundbars, speakers with optical/coaxial/L/R/3.5 mm audio output port. If ARC does not work, try disconnecting the cable or replacing the HDMI cable, wait a few minutes to reconnect and connect the converter to a power source.

Please note:

1. Make sure your TV has an HDMI (ARC) port.
2. Turn on your TV and ARC Converter ARC function before use.
3. This HDMI ARC adapter does not support Dolby AC3 / Dolby Digital Plus etc. Want to use 5.1 channel audio? Set the audio output to PCM or LPCM before use.
4. If ARC does not work, try disconnecting the cable or replacing the HDMI cable, wait a few minutes to reconnect and connect the converter to a power source.
5. When using the ARC function, volume must be adjusted by your audio device.
6. 3.5 mm L/R channel provides analogue sound.
7. If it does not work, try replacing the HDMI cable and reconnecting.

Specification:

Input port: 1 x ARC IN

Audio output port: 1 x optical, 1 x coaxial, 1 x L/R, 1 x 3.5 mm

Material: aluminium alloy

Power interface: Micro-USB

Maximum operating current: 65mA

Note:

- If you find that the adapter connected to your input device ARC does not work, check if you are connected to the HDMI (ARC) port of the input device.

- Keep the audio format of the input device and the soundbar consistent

- It is incompatible with Dolby AC3 / Dolby Digital Plus etc. Set the audio output to PCM or LPCM before use)