DrPhone eArc Lite - 192Khz HDMI Audio eArc Extractor 7.1CH Atmos Converter - 5.1 - for Dolby Digital Plus / Chromecast

【HDMI eARC function】Extract audio from your TV soundbar or amplifier via the TV's eARC port. (The TV must have an eARC port, otherwise it cannot be used). Connect HDMI ONLY, SPDIF/Coax or 3.5mm soundbar, speaker, home theatre, AV receiver, etc.

【 192KHz sampling rate】Built-in CEC volume control protocol ensures the TV remote can properly manage the volume. The converter can effectively fix audio defects. Supports 32, 44.1, 48, 96, 192KHz sampling rate, 24-bit left and right channels. (19pin HDMI 2.0 cable recommended).

【 2.0ch/5.1CH/7.1CH Extractor】Input: HDMI eARC, Output: 3.5mm Jack, Toslink/SPDIF, coaxial and HDMI ONLY. Supports PCM5.1 / LPCM 2.0 Channel, HDMI eARC Input 2.0CH 3.5mm jack or Optical/Coaxial 5.1 Output or 7.1CH 'hdmi only' Output; just Plug and Play

【Dolby Digital Audio】Supports Dolby Atmos, Dolby Digital Plus, DTS-X, Dolby@5.1, DTS@5.1, Dolby AC3, DSD, PCM, LPCM, etc. (when using a 3.5mm jack, you need to change the audio output to PCM or LPCM via the settings.)

【Digital Noise Reduction】By using high-quality chips, you can enjoy built-in digital noise reduction technology. The sound quality is clear and pleasant. The aluminium casing has good heat dissipation and is designed for hours of continuous use. Supports multi-channel simultaneous audio output with sound synchronisation without delay. No driver needed (Plug and play)

Specifications:

192KHz HDMI-compatible Audio eARC Extractor HDMI-compatible ARC To HDMI AUDIO + Toslink + Coaxial + L/R Converter Audio Return Channel Adapter

-Supports HDMI ONLY output

-Supports Optical SPDIF output

-Supports Coaxial output

-Supports 3.5mm stereo headphone output

-High performance audio amplifier

-Supports noise reduction switch

-Supports automatic signal mute function

-Supports transmission of 192 KHz audio sampling rate

-HDMI Audio Only interface supports 7.1 channel transmission

-Optical fiber/Coax interface supports 5.1 channel transmission

-ARC and 3.5mm headphone output volume can be controlled by TV (CEC)

Note:

• Connect HDMI port with "eARC" for HDMI TV.
• 3.5mm Jack only supports PCM/LPCM audio. If you want your headset audio to work properly, you need to set the output format to PCM/LPCM in the TV settings beforehand.
• If you want to use 7.1CH ATMOS, you need to
  plug HDMI AUDIO ONLY into HDMI IN of Soundbar/AVR. You cannot combine this port with the HDMI eARC/ARC port of your Soundbar/AVR

Included:

HDMI eARC adapter extractor. ....... 1 pcs

USB-C power cable ................................... 1 pcs

Manual ............................................ 1 pcs