Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
Switch: This switch can be used as an access point for POE devices such as IP cameras. You only need to connect a network cable to the device, which provides power and data to the device. The PoE switch automatically switches between 10/100/1000Mbps and uses stable PoE chips allowing your devices to benefit from a high-speed network.
PoE Ports: The PoE ports can automatically detect devices that comply with the 802.3af or 802.3at standard and regulate the correct power supply.
Note! If devices that do not support POE are connected to this PoE switch, the power supply will be blocked and only data will be transmitted.
Features:
- Plug & Play: Easy setup with no software installation or configuration needed
- Saves Energy: latest innovative energy-efficient technology greatly increases your network capacity with much less power consumption and helps save money
- Supports wireless access point (AP) via cat5 UTP up cable. Power supply for security cameras.
- Ports 1-4POE support IEEE802.3af or IEEE802.3at (optional).
- 10/100M/1000M Auto adjustment.
- Compliant with standards: IEEE802.310Base-T and IEEE802.3u100Base-TX.
- Flow Control Mode: full duplex IEEE*02.3x, Half-duplex.
- Support for auto MDI/DIX.
- Support for uplink ports lightning protection
- Maximum power: 15.4W(af) or 30W(at) per port.
- Automatic store and forward.
- Supports learning MAC addresses with automatic updates.
- Support long distance transmission up to 250 metres
- Powerful power adapter supplied for full load.
Supported e.g.:
IP cameras, routers, network switches, Wireless Access Points, smart clock, VOIP phones, alarm systems
Specifications:
- Model: TXE194
- Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX
- PoE Injecting Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4)
- LED Display System: Power (Green)
- Per PoE port:
PoE (Red/Blue, Port 1 to Port 4)
LNK/ACT (Green, Port 1 to Port 5)
- Dip switch: Standard mode for 100 M
- Extension mode for 250 m (Based on cable category)
- MAC Address Table: 1K mac-address table with auto learning function
- EST Protection: 4KV
- Switch: 1Gbps
- Switch Throughput: 0.74 Mpps @ 64 bytes
- Maximum Packet Size: 1536 bytes
- Flow Control: Backpressure for half duplex. IEEE 802.3x pause frame for full duplex
- Power Requirements: 52 V DC, 1.25A or 52V0. 92A
- Power Consumption: Max. 65 watt
- Dimensions (W x D x H): 124*72*24mm
- PoE Standard: IEEE 802.3af Power over Ethernet/PSE, IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Type: End-span + mid-span
- Power Pin Assignment: 1/2 (+), 3/6 (-),
- PoE Power: Per Port max. 15.4 watt (IEEE 802.3af), Per Port max. 30 watt (IEEE 802.3at)
- PoE Power Budget: 60 watt
- Number of PDs 7 watt: 4
- Number of PDs, 15.4 watt: 4
- Number of PDs, 30 watt: 2
