DrPhone PoE S1 - VLAN 100M POE Switch 6 Port - 4 POE Ports + 2 Uplink - Ethernet Switch - 250 Metre Camera System / CCTV

Switch: This switch can be used as an access point for POE devices such as IP cameras. You only need to run a network cable to the device, which provides power and data to the device. The PoE switch automatically switches between 10/100/1000Mbps and uses stable PoE chips so your devices can benefit from a high-speed network.

PoE ports: The PoE ports can automatically detect devices that comply with the 802.3af or 802.3at standard and regulate the correct power supply. Note! If devices that do not support POE are connected to this PoE switch, the power supply will be blocked and only data will be transmitted.

Features:
- Plug & Play: Easy setup with no software installation or configuration needed
- Energy Saving: latest innovative energy-efficient technology greatly increases your network capacity with much less power consumption and helps save money
- Supports wireless access point (AP) via cat5 UTP uplink cable. Power supply for security cameras.
- 10/100M Auto negotiation.
- Compliant with standards: IEEE802.310Base-T and IEEE802.3u100Base-TX.
- Flow Control Mode: full duplex IEEEx02.3x, Half-duplex.
- Support for Uplink port lightning protection
- Automatic store and forward.
- Supports learning of MAC addresses with automatic updates.
- Supports long distance transmission up to 250 metres
- Powerful power adapter included for full load.

Specifications:
- Model:TXE062 
- Type: 6-port POE switch
- Transmission distance: 250m
- Ports: 4x 100M PoE + 2 100M Fiber Uplink
- Supported protocol: IEEE802.3/IEEE802.3u/IEEE802.3x
- POE ports: 4 PoE ports + Uplink
- Supports IEEE 802.3af network power supply
- Operating temperature: -30 ℃ ~ 75 ℃
- Item size: 16x7.2x2.4cm 
- Item weight: Approx. 200g

Package:
1 x POE Switch
1 x Power Adapter
1 x User Manual