DrPhone PoE X1 - 10 port POE Switch - 8 + 2 - 48V Ethernet Network Switch for IP camera/Wireless AP/CCTV Camera System

Switch PoE: This switch can be used as an access point for PoE devices such as IP cameras. You only need to connect a network cable to the device, which provides power and data to the device. The PoE switch automatically switches between 10/100Mbps and uses stable PoE chips so your devices can benefit from a high-speed network. The PoE ports can automatically detect devices that comply with the 802.3af or 802.3at standard and regulate the correct power supply.

Note! If devices that do not support PoE are connected to this PoE switch, the power supply will be blocked and only data will be transmitted.

Features:
- Plug & Play: Easy setup with no software installation or configuration needed
- Energy Saving: latest innovative energy-efficient technology greatly increases your network capacity with much less power consumption and helps save money
- Supports wireless access point (AP) via cat5 UTP cable. Power supply for security cameras.
- Ports 1-8 PoE support IEEE802.3af or IEEE802.3at
- 10/100M Auto negotiation.
- 2 VLAN ports.
- Compliant with standards: IEEE802.310Base-T and IEEE802.3u100Base-TX standards.
- Flow Control Mode: full duplex IEEE*02.3x standard, Half-duplex supports backpressure.
- Support for auto MDI/DIX.
- Support for VLAN port lightning protection 6KV
- Maximum power: 15.4W(af) or 30W(at) per port.
- Store and forward automatically.
- Each port supports wire speed switching from 64 to 1536 frames.
- Supports learning MAC addresses with automatic updates.
- Support long distance transmission up to 250 metres and supports 500W pixels.
- Powerful power adapter included for full load.

Supported devices include:
IP cameras, routers, network switches, Wireless Access Points, smart clocks, VOIP phones, alarm systems

Specifications:
- Model number: TXE089
- Standards IEEE 802.3af/at, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
- Ports 10 (8 PoE = 2 VLAN)
- Support: VLAN, PoE support
- Transfer speed: 10/100Mbps
- Ports 1 ~ 8: IEEE 802.3AF/AT PoE ports
- Indicators LED indicators 1-Power (Green)
1-Extend (Green)
1-VLAN (Green)
8-PoE Status (Blue)
10-Link/Activity (Green)
- Power input voltage 48V DC
- Power DC adapter included
- Product height 40mm
- Product length 220mm
- Product width 160mm
- Product weight 742
- Colour Black
- Housing: Steel type

Included:
- EU power adapter (DC 48-52V) + Charger
- PoE Switch - 8+2 Ports
- Manual